Foil Quill Silhouette Cameo 3
The Foil Quill is a new tool that tin can be used with the Silhouette machines (along with other cutting machines) to add foil to paper, faux leather, and even vinyl!
The Foil Quill is getting a lot of fizz in the arts and crafts earth even while information technology's still on pre-order (we recommend purchasing through Swing Pattern). In this Foil Quill unboxing tutorial I'll evidence yous exactly what's in the box along with how to set up the foil quill and provide the best Silhouette cut settings.
Unboxing the Foil Quill: What'due south Included
In that location are three different size foil quills: fine tip, standard tip, and wide tip. They can be purchased together every bit a kit or individually.
Whether you purchase them individually or together as function of the Foil Quill kit, they all include 4 different machine adapters so they tin be used in either the Silhouette machines (CAMEO, Portrait, or Curio), the Cricut machines, Brother Browse N Cut and Sizzix.
Foil Quill Kit
The Foil Quill kit includes not only all 3 size foil quill tips and four adapters, but besides three rolls of reactive foil, a roll of tape, and a small metallic estrus shield.
Heat Reactive Foil
The foil quill tips heat upwardly using an attached USB cord and when run over heat reactive foil adhere the foil to the surface below. The foils can likewise be purchased separately or in bundles and come in a broad variety of colors (this is a big advantage over the 1-step Silhouette foil material which is simply available in 3 colors).
Materials that can be foiled include paper, leather, vellum, and even vinyl. Continue in mind the fabric where the foil is being placed, must be able to fit under the Silhouette rollers.
Tape
Tape is needed to go along the sail of foil in place while the heated foil quills draws over it applying information technology to the surface.
Heat Shield
The heat shield is used to protect the surface below the tip while the quill is heating up.
Private Foil Quill Tips: Fine, Standard, Broad
When purchasing the individual size foil quill tools you will receive the tool and all four machine adapters.
Designs for the Foil Quill
The Foil Quill volition work with any font or cut file - including SVGs and Silhouette Studio designs. It's important to know that the quill will work but like a Silhouette sketch pen or bract applying foil EXACTLY and ONLY where the cut lines are showing. That means the quill volition NOT fill up a blueprint with foil nor will it fill in a font.
For this reason, unmarried line/drawing fonts and designs specifically designed for sketching or foiling - like these on Then Fontsy - are ideal every bit they volition NOT result in an outline. And so Fontsy's foil quill and sketch designs include both the SVG and DXF file type. DXF can be opened with standard Silhouette Studio.
I would therefore Non recommend Silhouette users, who practice not have Silhouette Studio Designer Edition or college purchase the Foil Quill USB pollex drives offered past Nosotros R Retentivity Keepers.
The reason is, currently, these USBs include SVG designs and PNG designs. Since SVG designs can't be imported with standard Silhouette Studio, those users will need to import the PNG files. Just in order to employ PNG files the design needs to be traced to create a cut line and when y'all trace yous e'er become an outline and that defeats the whole purpose of the unmarried line blueprint.
Foil Quill Ready Up with Silhouette
Before you lot put your foil quill into your cutting car, find the correct adapter. Silhouette users want to use the A adapter. Slide it onto the quill tool and so screw information technology on so it's mitt tight.
Place the quill into the tool carriage in the Silhouette machine. It will fit in all CAMEOs, Portraits, and the Curio.
If you purchased the foil quill kit and take the metal estrus shield, slide information technology nether the tip to protect the surface below.
The USB end should exist plugged into an outlet or power strip and NOT the USB port on the side of the CAMEO. The power supply is what allows the tool to estrus upwardly and the Silhouette machines were non designs to handle this so I would Non recommend it.
Allow the tool to heat upward for 5 minutes.
While y'all're waiting, put your material on your Silhouette cutting mat. Position a piece of foil over your material ensuring it's placed covering the total areas where the design is to exist foiled.
TIP: I would recommend placing the textile towards the lesser of the cutting mat. This will allow you to remove the foil sheet while the mat is still loaded in the machine if you too need to cutting the material in a 2nd and divide pass.
Use washi record or the record included with the foil quill set to hold the foil in place. When taping the foil into place, try to keep information technology as smooth and taunt every bit possible. The easiest way to do this is to place half the tape onto the foil first then pull it tight as you lot press it onto paper, etc.
Best Silhouette Cut Settings for Foil Quill
The Foil Quill can be used on more than merely newspaper! It works beautifully on vinyl and imitation leather equally well.
No matter which cloth you employ yous desire both the tool and the action to be "Sketch" rather than cutting. Nonetheless, in order to select 'sketch' as the activeness in the Send panel you'll need to selection a "sketchable" textile (picking vinyl, for instance won't fifty-fifty requite y'all the selection to pick sketch).
Silhouette Cutting Settings for Foil Quill on Cardstock
When foiling on paper, place a slice of chipboard nether the cardstock as a"shim" to increment the thickness and add pressure under the area where the foil will be practical. I got dramatically better results when adding the shim.
I establish the best Silhouette cut settings for cardstock with the Foil Quill to be:
Cheque out how beautiful the foil quill works on paper!
Silhouette Cut Settings for Foil Quill on Vinyl
As crazy as it sounds, you can foil on vinyl using the foil quill.
I foiled onto Oracal 651 and got stunning results! The foil did NOT come up up on the transfer tape when transferring!
Silhouette Cut Settings for Foil Quill on Simulated Leather
You can currently guild the Foil Quill on pre-order through Swing Design. Shipping is expected in late February pending whatsoever delays past the manufacturer.
Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette Schoolhouse so I tin can keep buying new Silhouette-related products to show you lot how to get the most out of your machine!
Go Silhouette School lessons delivered to your email inbox! Select One time Daily or Weekly.
Source: https://www.silhouetteschoolblog.com/2019/02/foil-quill-unboxing-set-up-and-best.html
0 Response to "Foil Quill Silhouette Cameo 3"
Post a Comment